Aimpoint CompM4 & CompM4s Red Dot Sights w/ Free Shipping — 5 options

Aimpoint CompM4 & CompM4s Red Dot Sights Product Info The Aimpoint CompM4 Red Dot Sight incorporates an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems. This red dot scope by Aimpoint can also be used by hunters and sport shooters that need night vision compatibility and is available with a regular or low battery compartment. The performance of the AimPoint CompM4s Red Dot Sight is optimized for use with all generations of night vision devices (NVDs), but is especially suited for generation 3 night vision. The Aimpoint CompM4S Waterproof Red Dot Sight features a unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd Gen Night Vision. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, this Aimpoint CompM4/CompM4s Red Dot Sight is ready for use around the clock. Aimpoint 12595: CompM4 2MOA Waterproof Red Dot Sight, Black w/ LRP Mount Aimpoint 11972-EE: CompM4 Black Waterproof 2 MOA Red Dot Sights Aimpoint 12172-EE: CompM4 Black Waterproof 2 MOA Red Dot Sight, Matte Black S-Model w/ Low Battery Compartment Aimpoint 11972-KIT: CompM4 Black Waterproof 2 MOA Red Dot Sight w/ FREE Gerber Suspension Multi-Plier, a $34 value. This Gerber Tool contains needle nose pliers, wire cutter, fine edge knife, serrated edge knife, saw, scissors, cross point screwdriver, small and medium flat blade screwdrivers, can opener, bottle opener and lanyard hole. Aimpoint 12172-KIT: CompM4 S-Model 2MOA Red Dot Sight w/ FREE Gerber Suspension Multi-Plier, a $34 value. This Gerber Tool contains needle nose pliers, wire cutter, fine edge knife, serrated edge knife, saw, scissors, cross point screwdriver, small and medium flat blade screwdrivers, can opener, bottle opener and lanyard hole. Specifications for Aimpoint CompM4S Waterproof Red Dot Sights: OPTICAL DATA: System: Passive Red Dot Collimator Reflex Sight Magnification: 1X Eye relief: Unlimited Reticle, size: 2 MOA Optical coating: Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility ELECTRONIC DATA: Battery Type: AA Battery Life, typical: 80 000 hours for good quality battery Switch, dot brightness: 16 positions, 7 NVD, 9 daylight, of which 1 Extra Bright MECHANICAL DATA: Material housing: Extruded high strength aluminum Surface finish: Hard anodized, matte, Black Material lens covers: rubber, black matte Adjustment: 1 click = 16 mm at 100 meters = 1/2" at 80 yds Mounting: Keyed surface Patent pending mount keyed to the sight body to absorb recoil DIMENSIONS: Length: 120 mm (4.7") Width/height: 53x60 mm (2.1"x2.4") sight only - 72x72 mm (2.8"x2.8") including mount Ring width: none Weight, sight only: 265 g (9.3 oz) Weight, with integrated mount: 335 g (11.8 oz) ENVIRONMENTAL DATA: Temperature Range: -45 °C to +71 °C (-50 °F to +160 °F) Water resistance: 45 m (150ft) Features of Aimpoint CompM4 Red Dot Scope: Compatible with every generation of Night Vision (NVD) Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery Internal voltage regulator allows the CompM4 to be used with any AA size battery. Seven night vision compatible settings and 9 daylight settings QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear. Mount base is "keyed" into to the body of the sight to absorb recoil. Mount base screws directly into the sight - no separate sight ring is required. 500,000 hours of use on NVD setting 2 MOA dot for close combat and long distance engagement Matches perfectly with Aimpoint 3x Mag, (magnifier module). Unequalled light transmission. Front lens opening is threaded for addition of killFlash anti-reflective device. Submersible to 150 feet (45 meters) Standardized as the US Army's new M68 CCO Improved adjustment caps are easier to remove, and are protected against impact. Can be used with a carry handle adaptor for use on all M16 rifles. Offered in low battery compartment version (Comp M4s 12172) Package Contents: Aimpoint CompM4/CompM4s Red Dot Scope